Turn on a faucet in a nearby room to hot and listen for the heater to turn on. Then, look at every joint on the heater to make sure there are no leakages. Solder new copper adapters to the water intake on top of the heater. Using 6 in copper pipes, solder a new adapter to one open end of a pipe to make it fit correctly into the water intake on top of the heater. Use a pipe wrench to get the temperature and pressure relief valve fully tightened. Attach a new temperature and pressure relief valve.

Should you have almost any questions concerning where by as well as the best way to use https://www.bruederli.com/?s=https://patch.com, you are able to e-mail us from our website.